ULTRASONIC FLOWMETER-COUNTER UFM005
Basic advantages and features of the flowmeter-counter UFM005
- The flowmeter-counter can be applied for measurement and commercial accounting for flow rate and volume of hot and cold water, and another explosion- and fire-proof liquids which are not able to corrode materials of the primary flow converter.
- The device can be used as an additional flowmeter in the heat-counter UFEC005 for open heat supply systems according to the scheme approved by the RF Gosstandart and the RF Glavgosenergonadzor.
- The flowmeter-counter is able to store the average hourly and average daily parameters of the measured medium with time depth up to 5000 hours.
- The flowmeter-counter is equipped with two interfaces: RS-232C for information output from archives to the portable printer IDP 3110 “CITIZEN” (it can be delivered according to an order), RS-485 for information output from archives to personal computer.
- The flowmeter-counter is equipped with a real operation time counter.
- The flowmeter-counter is equipped with a two-line, multi-functional liquid-crystal (LC)-display (16x2). The parameter values and their units are presented in the display.
- The flowmeter-counter is equipped with an ergonomic membrane keyboard which makes it possible to work with the device both in the “Operation” and “Programming” modes.
- The flowmeter-counter is equipped with a device for the automated re-recording of the set-up parameters that prevents an unauthorized resetting and improves significantly reliability of the flowmeter operation.
- Wide range of the operated pipeline diameters (from 15 to 1600 mm).
- Long acceptable distance between the primary flow converters and the calculating device (up to 200 m).
- Storing of the programmed parameters, archives information under removal of electric power supply during two years.
- High reliability and stability of the measurements (the flowmeter-counter’s calculating device is manufactured on the completely imported elemental base produced by the leading firms - INTEL, MAXIM, MOTOROLA, etc.).
- The flowmeter-counter UFM005 is calibrated on the operation place without dismantling of the primary flow converters according to the spillage-free methodology approved by the RF Gosstandart. Inter-calibration period - 4 years.